Pressure Transmitter TSZ K


Pressure Transmitter TSZ K

Pressure transmitters type TSZ K with a sensor with ceramic diaphragm are intended for measurement of absolute pressure or overpressure, or, eventually, for indirect level measurement of aggressive liquids. The ceramic diaphragm of the sensor enables using the transmitters for measurement of chemically aggressive media, pure gasses [such as oxygen or helium, etc.].

Equipment and accessories:

- Various possibilities of analogue output

- Communication with a control system with a communication RS-485

- Accuracy up to 0.25 %

- Possibility of resetting the range and calibration of the manometer

- Possibility of ingress protection up to IP68

Certificates:

- Certificate of the type TSK 173/06 - 008 as a gauge under legal metrological control

- Certificated FTZÚ 07 ATEX 0311 enables usage for pressure measurement in environments with potentially explosive atmospheres.

Files for download

ATEX Certificate of the Type

Ordering Table

Technical Description

Technical Conditions, Installation, and Connection

Related products
Overvoltage surge barriers type PBM are intended for protection of the inputs and outputs against undesirable effects of electric voltage. The overvoltage surge barriers are put between feeder conductors and protected electronic devices. They are to ground the voltage impulse emerged from overvoltage. The inevitable condition of the correct function of the device is good grounding of the ground clamp of the overvoltage surge barrier. The overvoltage surge barrier is produced as a variant into an installation box [protection of the devices connected outside a distributor] or for an installation to a DIN board [as output clamps in a distributor].Equipment and accessories:- Variant into an installation box RV-3 for assembly outside a distributor- Variant for installation to a DIN board for as ... more
Pressure surge dampers TTR are intended for protection of the pressure transmitters and manometers against pressure surges emerging in pressure distribution. ... more
Visual display unit type DMU-13 is intended for measurement and displaying of the instantaneous value of the current loop 4 - 20 mA of any physical quantity convertor. The unit does not require plugging voltage - it is plugged directly from the measured current loop. It is fully configurable with a keyboard. The measured quantity and unit is displayed at the device. The unit is to be assembled to a wall.Equipment and accessories:- Displaying of the measured quantity at an alphanumeric display- Possibility of setting the physical unit - Possibility of setting all the parameters with the buttons at the front display board- Optional backlighting and display color ... more
Measuring and control digital visual display units type DMU-11 are intended for measurement, displaying of instantaneous value of the measured quantity at the LED display and for its indication or control with 4 programmable relays with a possibility of setting the comparative level and hysteresis for every relay separately. The unit may be connected with a wide spectrum of analogue signals (mA, V, mV), resistance transmitters, or temperature sensors (Pt, Ni, thermocouples, resistance sensors etc.). The unified analogue output enables their integration into upper control systems. Robust fabrication in an aluminum alloy box enables its usage also in adverse conditions of heavy, chemical, and food industry.Equipment and accessories:- Displaying of the measured quantity at a LED display- Poss ... more